Search results

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.

The strength of printed parts by application of fused deposition modeling (FDM) has been broadly studied through experimental methods. However, constitutive behaviors of the printed parts in theory are still unclear. Therefore, this paper aims to focus on building an elasto-plastic model of the printed parts to reveal the constitutive behavior.

An elasto-plastic constitutive model that considers anisotropic characteristics is proposed. Tensile tests are performed for parameter identification by using different samples with varying printing angles. Finally, the constitutive model is completed and applied to the numerical analysis of a tensile procedure.

The experimental study indicated that the anisotropic characteristics are significant for elastic modulus and strength of printed parts. The polar anisotropic model is suitable for describing the anisotropic behavior of parts during the elastic deformation. The Hill model is suitable to describe the yield property. The elastic modulus and yield point of parts printed in any specific orientation can be calculated using the proposed constitutive model.

A theoretical model has been developed to describe the constitutive behavior of FDM printed part. This model can precisely describe the elastic behavior and yield point of parts printed with various orientations. This model can be applied to the finite element simulation of printed structures.

The purpose of this paper is to explore the operation strategies of a manufacturer who produces brown and green product simultaneously.

The authors establish three models to examine the joint decisions of pricing and advertising. Three advertising strategies are: non-advertising investment (NA), advertising investment for brown product (BA) and advertising investment for green product (GA).

The theoretical analysis shows that advertising investment can substantially increase the product greening level and manufacturer's profit. More importantly, we find that the GA strategy is more likely to be the best strategy as the advertising investment efficiency increases. The BA strategy is more likely to be preferred as the R&D cost increases. Finally, the modeling results are verified by numerical experiments, and more insights are obtained.

This paper considers the case in which a single manufacturer produces the brown and green product simultaneously. In fact, many manufacturers in the market produce brown and green product at the same time. Furthermore, in addition to advertising investment for brown product and green product, manufacturers can also invest in advertising for brands.

The paper contributes to the investigations on green production and advertising decisions of a manufacturer who produces brown and green products simultaneously.

Internet + and Electronic Business in China is a comprehensive resource that provides insight and analysis into E-commerce in China and how it has revolutionized and continues to revolutionize business and society. Split into four distinct sections, the book first lays out the theoretical foundations and fundamental concepts of E-Business before moving on to look at internet+ innovation models and their applications in different industries such as agriculture, finance and commerce. The book then provides a comprehensive analysis of E-business platforms and their applications in China before finishing with four comprehensive case studies of major E-business projects, providing readers with successful examples of implementing E-Business entrepreneurship projects.

Internet + and Electronic Business in China is a comprehensive resource that provides insights and analysis into how E-commerce has revolutionized and continues to revolutionize business and society in China.

The soil water retention curve (SWRC) and unsaturated hydraulic conductivity (UHC) are crucial indices to assess hydraulic properties of porous media that primarily depend on the particle and pore size distributions. This study aims to present a method based on the discrete element model (DEM) and the typical Arya and Paris model (AP model) to numerically predict SWRC and UHC.

First, the DEM (PFC^3D software) is used to construct the pore and particle size distributions in porous media. The number of particles is calculated according to the AP model, which can be applied to evaluate the relationship between the suction head and the moisture of porous media. Subsequently, combining critical path analysis (CPA) and fractal theory, the air entry value is applied to calculate the critical pore radius (CPR) and the critical volume fraction (CVF) for evaluating the unsaturated hydraulic conductivity.

This method is validated against the experimental results of 11 soils from the clay loam to the sand, and then the scaling parameter in the AP model and critical volume fraction value for many types of soils are presented for reference; subsequently, the gradation effect on hydraulic property of soils is analyzed. Furthermore, the calculation for unbound graded aggregate (UGA) material as a special case and a theoretical extension are provided.

The presented study provides an important insight into the relationship between the heterogeneous particle and hydraulic properties by the DEM and sheds light on the directions for future study of a method to investigate the hydraulic properties of porous media.

The purpose of this paper is to develop non-leaching and eco-friendly antimicrobial waterborne polyacrylates with excellent antibacterial properties by grafting antibacterial vinyl monomer, glycidyl methacrylate (GMA) modified polyhexamethylene guanidine hydrochloride (PHMG).

PHMG of different molecular weights were modified by GMA to synthesize antibacterial vinyl monomer, GMA-modified PHMG (GPHMG). Different content and molecular weights of GPHMG were used to synthesize antimicrobial waterborne polyacrylates through emulsion polymerization.

The addition of GPHMG gained by modifying PHMG showed little influence on thermal stability of the films, but decreased the glass transition temperature(Tg). Meanwhile, the tensile strength decreased, while the breaking elongation increased. The antibacterial properties of the antibacterial films with different GPHMG contents were studied, when GPHMG content was around 0.9 Wt.%, antibacterial films showed excellent antibacterial activity (antibacterial rate >= 99.99 per cent). When weight content of GPHMG in the films remained constant, antibacterial property of films increased first and then decreased with the increase of molecular weight of GPHMG. The structural antibacterial polymer film had more perdurable antibacterial activity than the blended one.

The grafting efficiency of GPHMG to antimicrobial waterborne polyacrylates could be further improved.

Antimicrobial waterborne polyacrylates with excellent antibacterial properties can be used to antibacterial coating and adhesive.

The antibacterial properties of films with different molecular weight of GPHMG were studied, and the durability and stability of antibacterial properties between structural antimicrobial films and blended antimicrobial films were also investigated by ring-diffusion method.

This paper aims to design a composite, aiming to improve the static puncture resistance through polyurethane impregnated treatment with five concentration gradients.

The relationship between polyurethane concentration, the number of polyester nonwovens, component fiber type (filament or staple) and the static puncture resistance is explored respectively and elaborately.

This study provides a new perspective to design flexible composites with better static puncture resistance, feasible preparation process as well as low cost.

The results show that the static puncture resistance of nonwovens impregnated by polyurethane is improved obviously. Meanwhile the puncture strength-T of nonwovens increases first and then decreases with the increase of the number of layers, and the maximum puncture strength-T is found at 20 layers. Moreover, the composite with filaments illustrates better mechanical resistance.

The prediction of accurate failure strength and a composite laminate failure load is of paramount importance for reliable design. The progressive failure analysis helps to predict the ultimate failure strength of the laminate, which is more than the first ply failure (FPF) strength. The presence of a hole in the laminate plate results in stress concentration, which affects the failure strength. The purpose of the current work is to analyze the stress variation and progressive failure of a symmetric laminated plate containing elliptical cutouts under in-plane tensile loading. The effect of various parameters on FPF and last ply failure (LPF) strength is studied.

The ply-by-ply stresses around elliptical cutouts are obtained analytically using Muskhelishvili's complex variable formulation. To predict the progressive failure, Tsai–Hill (T-H) and Tsai–Wu (T-W) failure criteria are used, and depending on the mode of failure, lamina modulus is degraded.

The study has revealed that fiber orientation and stacking sequence for given loading have the most significant effect on the laminate's failure strength.

Complex variable method and conformal mapping are simple and proficient for studying failure analysis of a laminated plate with elliptical cutout.

Motivated by consumers' concerns about water resources, this paper studies the interactive impact of advertising efforts and water-saving on corporate profits in apparel supply chains. Moreover, this study attempts to find an effective way to improve the profit of supply chain members under different game scenarios. Therefore, this study explores the game scenarios with considering the cost-sharing contract.

This paper constructs two basic game models considering different market power in the apparel supply chains, and explores the Pareto improvement combined with cost-sharing contracts based on the basic models. Furthermore, this study extends the models by considering cost-saving and non-linear demand.

In this paper, it can be found that advertising efforts and water-saving have complex interactive relationships. Counter-intuitively, the increase in advertising efforts may increase water savings. Furthermore, it presents a Pareto improvement when considering cost-sharing contracts, and both the manufacturer and the retailer's profits may improve simultaneously. Moreover, it does not affect the main conclusions when consider the effects of cost-saving and non-linear demand.

Although some important findings have been reached, this paper can be extended in many ways in the future. For example, the coordination mechanism among supply chain members can be considered and the fair distribution of profits can be studied. Moreover, the influence of the government policies on the optimal strategy, as well as changes in social welfare can be considered.

This study offers supply chain members the guidelines on coordinating water-saving investment and advertising efforts which provided new insight into the interaction of these two factors in the apparel supply chains. Moreover, it can provide a coordination mechanism for the supply chain members to improve their profits.

This paper explores the interactive relationship between water-saving and advertising efforts. It can not only save more water resources but also enable consumers to enjoy more environmentally friendly apparel products.

The current literature mainly focuses on the impact of advertising efforts on firm profit. However, this paper studies the interaction between advertising efforts and water-saving in apparel supply chains. Furthermore, this study explores the optimal pricing strategies and Pareto improvement by considering cost-sharing contracts. It can provide theoretical and practical guidance for the decision-maker in deciding on advertising and water-saving investment.

To attain green economic efficiency, small, micro and medium-sized firms must follow environmental paradigms. This research aims to discover the relationship between green intellectual capital, green entrepreneurial orientation, green marketing, green organizational culture and competitive advantage strategies to attain sustainable manufacturing business success.

Today, many companies have accepted their responsibilities, that their operations should not harm the environment. This paper aims to discover the relationship between green factors and competitive advantage strategies to succeed in sustainable manufacturing. The employees of the large manufacturing firms in China are the sample population of the present investigation. Through simple random sampling, surveys were distributed via email. The present study was a quantitative analysis. The analytical tool utilized here was structural equation modeling and SmartPLS program applications.

The empirical outcomes find that green intellectual capital positively influences competitive advantages and sustainable success in business. In addition, the impact of green entrepreneurial orientation on competitive advantages and sustainable success is positive and significant. The findings illustrated that green marketing is an essential factor in competitive advantage and sustainable success in business. Another point is that green organizational culture positively affects competitive advantages and sustainable success. Finally, competitive advantages have significantly affected sustainable success in business.

The outcomes help specialists enhance their practices to reflect sustainable business efficiency and competitive advantages.

This is the first study that examined businesses' sustainable success and green factors in a comprehensive model and using a specific sample of manufacturing companies based on green technologies.